background image

 

MeshDynamics 4000 Series APs 

PN: 1725-36164-001_B.doc 

3

Introduction 

Polycom’s Voice Interoperability for Enterprise Wireless (VIEW) 
Certification Program is designed to ensure interoperability and high 
performance between SpectraLink Wireless Telephones and WLAN 
infrastructure products.  
The products listed below have been thoroughly tested in Polycom’s 
lab and have passed VIEW Certification. This document details how 
to configure the MD4000 series access points (MeshNodes) with 
SpectraLink Wireless Telephones. 

Certified Product Summary 

Manufacturer: MeshDynamics 

Inc.: 

www.meshdynamics.com

 

Approved products: 

Wireless Controllers 

Access Points 

 

N/A 

MD4000 series APs 

RF technology: 

802.11b/g/a 

Radio: 

2.4 GHz, 5 GHz 

Security: WPA-PSK 

and WPA2-PSK (AES) 

AP firmware version certified: 

2.5.69 

SpectraLink handset models certified: ** 

e340/h340/i640 

8020/8030 

SpectraLink handset software certified: 

89.110 

122.013 

SpectraLink radio mode: 

802.11b 

802.11b 802.11g 802.11a 

Maximum telephone calls per AP: 

12 * 

10 

Recommended network topology: 

Switched Ethernet (recommended) 

* Maximum calls tested during VIEW Certification. The certified product may actually support a higher 
number of maximum calls for 802.11a and 802.11g radio modes. 

** SpectraLink handset models 8020/8030, e340/h340/i640 and their OEM derivates are VIEW Certified 
with the WLAN hardware and software identified in the table. Throughout the remainder of this 
document they will be referred to collectively as “SpectraLink Wireless Telephones”. 

Service Information 

If you encounter difficulties or have questions regarding the 
configuration process, please contact technical support at 

www.meshdynamics.com 

If you have questions related to this guide, please contact the Polycom 
Customer Support Hotline at 1-800-775-5330. The hotline is open 

Содержание MD4000 Series
















Отзывы: