VP Essentials Sensor User Manual (Rev. A)
8
Mesa Labs, Inc.
12100 W. 6th Avenue
Lakewood, CO 80228 USA
Tel: 303-565-2724
monitoring.mesalabs.c
om
6.0
Features
6.1
User Interface
6-1 VP Essentials Sensor
–
Illustrating Position of Push Button and LED
The hidden push button is located underneath the door icon image. Push the door icon image to engage
the push button. As you push that area you should feel the button indent and hear a click.
Use the push button and LED to query the sensor about various states of operation and to change the
operating mode of the sensor.
Query Sensor
Action or State
Button
LED
Normal run mode. (Sensor is
linked to the Access Point)
No button pressed.
Not lite.
Normal run mode query.
(Sensor is linked to the Access
Point)
One button press (held less
than 3 seconds)
The LED is turned on for 10
seconds.
Firmware Fault Condition or
Unprogrammed/Configuration
Error
No button pressed
Two quick blinks every second.
Indication of Radio Broken Link
State
One button press (held less
than 3 seconds)
LED is lite while button pressed
and when button is released.
LED is turned off and then a
quick blink after one second.
Indication of Deep Sleep State
One button press (held less
than 3 seconds)
LED is lite while button pressed
and when button is released.
LED is turned off and then two
quick blinks after one second.
Tables
6-2 Sensor Query Actions
LED
Hidden Push Button