Mesa MQC 0506, Руководство по эксплуатации

Страница: 4 / 20

MESA Automation GmbH
MQC 05 V 3 EM 2
1 Technical specifications for MQC
Power stage
Input voltage Chapter 1.1 Basis models
Over voltage protection 85 VDC (U
A
=60 V)
160 VDC (U
A
=120 V), 190 VDC (U
A
=150 V)
Chopper frequency 8 kHz (to GND)
Form factor at nominal ratings 1.01 (Rated current)
Power stage protection short circuit
Fault signalling red LED
ϑ
max ,
- Î
max
;- U
max
Braking module page 12/10.4
Speed controller
Input command
Differential ± 10 V Ri = 20 k Ω
Tacho reference signal
Differential ± 5V ... ± 60 V Ri = 54 k
Ω
Compensation network PI (D)
correction with potentiometer or components
Speed control range 1:20000
static Error 30...3000 rpm ± 0,1 %
1...30 rpm ± 2,0 %
< 1 rpm ± 5,0 %
Current controller
Band width 1 kHz
Compensation network Pl
Current limitation 1 I
Arms
Current limitation 2 max. output current I
Amax
Enable X1/PIN5 connect to 0 V, (optional + 24 V)
signals
Drive healthy (relay contact) X1/PIN6 connect to X1/PIN7
Contact ratings 160 VDC/20 mA
"OK“ LED green on
"error" LED red on
„Braking“ LED red + green on
other Data
Operating temperature
ϑ
u
0...45 °C derating 2 %/ K from 45 °C to 60 °C
Storage temperature -10...+70°C,
Cooling by air convection, or fan
rel. humidity 65 %, without condensation
Protection class IP 20
Isolation group C /VDE 0110
Size Chapter 9.5