- 47 -
U.motion KNX Server Plus, Touch
Installation Manual
Now you can select between the following actions:
•
Automatic integration of the missing group addresses by clicking the link in the message box
•
Manual selection of the related group addresses or deselection of group addresses that are causing the warning
•
Activation of the EXPERT mode and removal of the option “ CREATE AUTOMATIC RELATIONS”
If the missing group addresses are added, it’s still possible that the message will appear again during the
import, since also the newly added group addresses could have relations to other group addresses. In this
case, just repeat the procedure as long as all relations are created correctly.
5.6
I
MPORT OF A
CSV
F
ILE
U.motion KNX Server Plus Touch also supports the import of KNX group addresses through a CSV file; the file must show
the following properties:
•
Columns divided through tabulator
•
Name of the group address in the first column
•
Group address in the second column
•
Bit length (optional) in the third column
