- 25 -
U.motion KNX Server Plus, Touch
Installation Manual
The TOOLBAR can show the following action buttons:
EDIT
Opens the configuration window of the selected objects
DELETE
Removes the selected objects from the project
CLONE
Clones the selected objects
The CLONE-action creates a one-on-one copy of the selected objects. After the execution of this command, the search
results are refreshed and also the cloned objects will be shown (can be recognized from the prequel “Copy of ...”).
When cloning an object, not only the objects itself is duplicated, but also all of its connections / relations with
other objects This means that the cloned object will be contained in the same rooms, logics, scenarios etc. as
also the original object. Therefore, after the creation of a cloned object, all relations and connections should
be checked and – if necessary – corrected.
Note
: if the original object was present in a room with BACKGROUND view, the cloned object will be
positioned AT THE SAME PLACE in the room and will cover the original object. In this case, please edit the
BACKGROUND view and place the cloned object in a different position.
2.6
W
ORKSPACE
2.6.1
O
VERVIEW
The WORKSPACE is the working surface of the ADMINISTRATION area. It offers the possibility to open several
configuration windows at the same time in different tabs. The configuration window of a selected entry will be opened
when the EDIT-action (either the 3 points of the selected entry or the EDIT button in the TOOLBAR) is executed.
