- Place Back Rest Cross Beams in order.
- Insert (a) screws partially through Back
Rest Panel C1, C3 and C5. See Figure 1.
- Position screw ends on pre-marked center
points on Back Rest Cross Beams.
- Postition Back Rest Panels C2 and C4 into
place with (a) screws and secure.
Figure 1
Right Arm
Rest (A1 R)
Left Arm
Rest (A1 L)
Left Front
Leg (F1 L)
Right Front
Leg (F1 R)
CHAIR COMPONENTS
Back Rest Panels
Right Base
Leg(B1)
Left Base
Leg(B1)
Top Back Rest
Cross Beam (C9)
Back Support (E)x2
Arm Rest
Connection(D)x2
Bass Bottom
Support (B4)
Seat Slats (B5)x5
Front Seat
Slat (B3)
Bottom Back Rest
Cross Beam (C10)
(34 pcs + 2 spare)
(10 pcs + 1 spare)
1
2
Page 1
v.2.0
Read all instructions before starting.
Do not completely tighten all bolts until the unit is fully assembled.
b
c
d
HARDWARE
(4 pcs + 1 spare)
(8 pcs + 1 spare)
*Powerdrill recommended
for assembly.
CARE INSTRUCTIONS
This is an Unfinished, Solid Fir Wood Adirondack Chair. It is HIGHLY RECOMMENDED that you treat the
chair with a WEATHERPROOF COATING (stain or paint) before use, and continued once a year, to
increase the life expectancy and maintain the look of the chair. Please consult with your local hardware
store on the weatherproof coating options for the chair.
•
Cover the Adirondack Chair duing harsh weather to keep it from weathering.
•
Rinse any panels with water to clean.
•
When assembling MERRY PRODUCTS’™ ADIRONDACK FURNITURE, please handle all
panels and/or hardware with care to avoid any possibilities of damages and/or injuries.
NOTES:
TOOLS RECOMMENDED
# 13mm
C1 C2
C3
C4
C5
Supporting
Block(A2)x4
C9
C10
C5
C3
C1
a
a
C4
C2
a
a
a
MPG-ACE030KIT CHILD’S ADIRONDACK CHAIR KIT
*Powerdrill
