1
Thank you for purchasing this Merlin Product. Please read the
instruction manual carefully before using the product.
The documentation provided will allow you to fully enjoy all the
features this unit has to offer.
Please save this manual for future reference.
Product Content
-
A pair of wireless earphones (Left and Right)
-
Charging Base/Dock
-
Charging Cable
-
QR Code stub for the product page and user manual
Instruction
Charging the Base
-
The base can be charged from any USB port like smartphone’s USB
charger, Computer’s USB port, and Car USB charger with the use of
the included Micro USB cable
-
And a blue LED indicator just below the charging port can tell the
charging status of the base by a certain number of flashing.
1
–
Flash means 25% full;
2
–
Flash means 50% full;
3
–
Flash means 75% full;
4
–
Flash means 100% full
Charging the Earphones
-
Insert the earphones properly to their corresponding seats and
close the cover gently.
-
Observe the LED of the earphones to know their charging status.
If the LED flashes by fading on and off means that it is charging and
once it is full, the LED will turn off.
Pairing
Solo Use
-
Tap and hold either Left or Right earphone for about 5 seconds to
turn the device ON and eventually put it in pairing mode.
-
Open your Bluetooth in smartphone and pair it with “
SonicX
”
Dual Use
-
Tap and hold both earphones for about 3 seconds to turn them ON
and eventually get in sync and be in pairing mode. Please take note
that both earphones has their way of connecting to each other and
automatically manages to put the right earphone into pairing
mode. So, always keep your smartphone at your right pocket to
avoid signal interference.
-
If in case that you decided to use both from solo then all you have
to do is to simply turn ON the other side and wait until it gets
synchronized.
Touch Navigation (Playback Mode)
-
Both earphones has touch panel with commands as follow:
Switch ON
–
tap and hold for about 3 seconds
Switch OFF
–
tap and hold for about 8 seconds
Tap (once)
–
Play/Pause
Tap (twice)
–
(Left) or Volume- (Right)
Tap (hold)
–
Next Track (Left) or Previous Track (Right)
Touch Navigation (Call Mode)
Tap (once)
–
Answer/End the call
Tap (twice)
–
Call (Left) or Call Volume- (Right)
Tap (hold)
–
Reject Incoming call
FAQ
Q) Why is the device not charging?
A)
Possible reasons are faulty charging cable or faulty charger
(power source). This can be sorted out by using a different
charging cable or a different power source like your
smartphone’s USB charger or a computer. Make sure that the
LED indicator of the base is flashing.
Q) Why there is signal interference during Playback or Phone Call.
A)
Human body contains a lot of water which hinders
electromagnetic waves. So please make sure that your
smartphone is located somewhere within the line of sight of
the right earphone.
Maintenance
1.
Retain these instructions for future use.
2.
Clean the product with a damp cloth and mild soap.
3.
Do not expose this product to rain or moisture.
4.
Be careful not to turn or twist the cables used in this product
too much as it can lead to malfunction and failure.
5.
This product is not designed to be submerged in water and
will malfunction if this occurs.
6.
This product has no user serviceable items inside. Do not
open this product as the user risk injury and would void the
warranty.
7.
Keep unit away from strong magnetic fields to avoid
interference with the product.
