1
ProShot Gimbal
Thank you for purchasing this Merlin Product. Please read the instruction
manual carefully before using the product.
The documentation provided will allow you to fully enjoy all the features
this unit has to offer.
Please save this manual for future reference.
Product Interface:
Instructions
1) Unscrew the battery cover at
the bottom, insert two batteries,
and screw tight the cover.
2) Pull the clamps of the smartphone
holder and place your smartphone.
Ensure that your smartphone is seated
securely.
3) Before you turn on ProShot, you need to
ensure that the gimbal is balanced with
your smartphone in it.
4) Position your smartphone as shown in the image above and
hold the gimbal steady, perpendicular to the ground. Slide your
phone to the left or right to have it balanced and parallel to
the ground (as shown in the image above).
5) If your phone is positioned at the extreme right and still tilting
to the left, open the balance weight cover and insert the
included weight and screw tight the cover.
6) Once your smartphone is properly balanced, press and hold
the function button to turn ProShot on.
7) If your gimbal is not steady, follow these steps to calibrate it.
8) Power ProShot on and wait for at least 3 seconds.
9) Press and hold the joystick in for more than 6 seconds until all
the motors turn off and the function button lights up.
10) Place ProShot on a steady, flat surface as shown in the image
below.
11) The function button should flash three times and then stay lit,
indicating that the calibration is complete.
12) After successful calibration, restart ProShot.
Universal 3-Axis Gimbal for All Smartphones
