Meritor Meritor ELSA 195, Руководство по обслуживанию, Страница: 39 / 49

39 ArvinMeritor Air Disc Brake ELSA 195
Fig. 53
Fig. 55
Fig. 54
7 Guide Sleeve, Dust Excluder, Retainer and Bush
NOTE
: If the short guide sleeve excluder retainer is undamaged
it is not necessary for it to be removed, as the oval bush must be
pushed out in the direction of the end cap (Fig 53).
If replacement is required, the retainer can be knocked out after
the bush has been removed - Fig 54.
NOTE
: Clean the guide sleeve bores with a suitable brake
cleaner or clear methylated spirits. Examine the condition of the
bores for wear corrosion or damage. If there is any doubt in the
suitability for further service replace with a new housing
assembly.
E - Fitting Guide Sleeve Oval Bush (16) –
Short Guide Sleeve
Align new oval bronze bush with markings on housing - Fig.55.
NOTE
: The bush must be assembled from the actuator side of
the housing.
Fit the ArvinMeritor Service Tool MBT 1000 and insert new bush
into the housing bore - Fig 56.
Using remaining parts of ArvinMeritor Service Tool MBT 1000.
Fig. 56
bronze bush