76
Chapter 5
Configure the Router in Access Point Mode
• Require Password:
Generally, Require Password should be selected if the login of the
mailbox requires username and password.
• Username:
Enter the email address used for sending the system log.
• Email Password:
Enter the password to login the sender’s email address.
• SMTP Server:
Enter the SMTP server address. SMTP server is available for users in most
webmail systems. For example, the SMTP server address of Hotmail is smtp-mail.outlook.
com.
• Email To:
Enter the recipient’s email address, which can be the same as or different from
the sender’s email address.
• Mail Log Automatically:
If selected, the router will automatically send the system log to the
designated email address.
• Frequency:
Specify how often the recipient will receive the system log.
• Mail Time:
Specify when the recipient will receive the system log.
5. 7. Diagnostics
Diagnostic is used to test the connectivity between the router and the host or other
network devices.
1. Visit
http://mwlogin.net
, and log in with the password you set for the router.
2. Go to
System
>
Diagnostics
.
3. Enter the information:
1 ) Choose
Ping
or
Traceroute
as the diagnostic tool to test the connectivity.
• Ping
is used to test the connectivity between the router and the tested host, and
measure the round-trip time.
• Traceroute
is used to display the route (path) your router has passed to reach the
tested host, and measure transit delays of packets across an Internet Protocol
network.
2 ) Enter the
IP Address
or
Domain Name
of the tested host.
