MW305R
300Mbps Wireless N Router User Guide
number of the service port or service port range in the
External Port
field.
3.
Leave the
Internal Port
blank if it is the same as the External Port, or enter a specific port
number if the External Port is a single port.
4.
Enter the IP address of the computer running the service application in the
IP Address
field.
5.
Select the protocol used for this application in the
Protocol
drop-down list, either
TCP
,
UDP
, or
All
(All protocols supported by the router).
6.
Click
Save
.
To modify an existing entry:
1.
Find the desired entry in the table.
2.
Click
in the
Edit
column.
3.
Click
Save
.
5.4.2
DMZ Server
Go to
Advanced Users→DMZ
Server
, and then you can view and configure DMZ host on the
page. The DMZ host feature allows one local host to be exposed to the Internet for a
special-purpose service such as Internet gaming or video conferencing.
To assign a computer or server to be a DMZ server:
1.
Enter the IP address of a local PC that is set to be DMZ host in the
DMZ Host IP Address
field.
2.
Toggle On to enable
DMZ Server.
3.
Click
Save
.
5.4.3
UPnP Settings
Go to
Advanced Users→UPnP Settings
, and then you can view the information about
UPnP
.
The Universal Plug and Play (UPnP) feature allows the devices, such as Internet computers, to
NOTE:
Please make sure the external port is different from the port used for local and remote
management, or the virtual server may not be working properly.
- 37 -
