MW305R
300Mbps Wireless N Router User Guide
the ISP will not accept it as the MAC address is changed. In this case, you need to clone
your computer’s MAC address to the router.
Manually set MAC address -
If your ISP requires you to register the MAC address, please
enter the correct MAC address into this field in XX-XX-XX-XX-XX-XX format (X is any
hexadecimal digit).
Click
Save
to make the settings effective.
5.1.5
DHCP Server
Go to
Network
→
DHCP Server
, you can configure the DHCP Server settings on the page. The
router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which
provides the TCP/IP configuration for all the PCs that are connected to the router on the LAN.
DHCP Server -
Click the button to enable or disable
the DHCP server. If you disable the
server, you must have another DHCP server within your network or else you must
configure the computer manually.
Start IP Address -
Specify an IP address for the DHCP Server to start with when
NOTE:
Only the PC on your LAN can use the MAC Clone function.
- 24 -
