manualshive.com logo in svg

Mercury VesselView Mobile, Руководство пользователя

Поделиться
Скачать
Mercury VesselView Mobile Скачать руководство пользователя страница 89

Section 5 - Propulsion Menu

90-8M0070299   

eng

  MAY  2012

Page  85

5. Press the check button to exit the edit mode.
6. Move the remote control handle to the WOT position to reach the RPM set point.

Setting Smart Tow Launch Control

IMPORTANT: Do not leave the helm while using Smart Tow launch control.
1. From the "SMART TOW" screen, press the check button to activate the RPM set point box.
2. Use the left and right arrow buttons to set a maximum RPM.
3. Press the down arrow to activate the Smart Tow status box.
4. Press the left or right arrow button to set the status from "ENABLED" to "LAUNCH."
5. Press the down arrow to activate the "LAUNCH CONTROL" box.
6. Press the left or right arrow button to select the launch profile best suited to your towing application. Five profiles are

available ranging from the least aggressive acceleration (Profile 1) to the most aggressive acceleration (Profile 5).

27255

Launch profiles

7. Press the check button to exit the edit mode.
8. Move the throttle to WOT to begin the launch. The "STATUS" box displays "ACTIVE" while the launch is in progress.

Содержание VesselView Mobile




















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды