manualshive.com logo in svg

Mercury VesselView Mobile, Руководство пользователя

Поделиться
Скачать
Mercury VesselView Mobile Скачать руководство пользователя страница 63

Section 4 - Main Menu

90-8M0070299   

eng

  MAY  2012

Page  59

NOTE: Setting a higher percentage requires the engine or drive to be trimmed for a longer duration to activate the pop‑up

window. For example, setting the "TRIM DELTA %" parameter at 2% demands that the trim system must move 2% in one

second for the trim pop‑up window to appear. If you restrict trim movement to a percentage lower than this parameter, the

trim pop‑up window will not appear. This way you can perform fine trim adjustments by pressing the trim control button for

short periods without activating the trim pop‑up. Using the "USE TRIM FLAG" option will activate the pop‑up window every

time the trim button is activated and may cause the trim pop‑up window to appear several times whenever the ignition key

is turned to the "ON" position.

Tab Settings

The "Tab Settings" option allows changes in the number of SmartCraft compatible tabs available, the type, and location of the

tab. The menu path is: "Main" > "Settings" > "Screen Options" > "Tab Settings." "MERCURY" or "POD" must be selected for

VesselView to display the tabs. If the power package is Zeus, adjustment of the tabs is not required. If the power package

originally has tabs installed, the tabs have been configured during the device setup. Refer to 

Section 2 

‑ 

Device Setup

.

a -

Propulsion type

b -

Number of tabs

c -

Starboard tab

d -

Port tab

1. Upon entering "TABS," the "PROPULSION TYPE" window will be highlighted in blue.
2. Press the left or right arrow to change to "NONE," "MERCURY," or "POD." When "POD" is selected calibration is not

required.

NOTE: A third tab is available and is identified as "CENTER TAB."

3. Press the down arrow to highlight "NUMBER OF TABS."
4. Press the left or right arrow to change the number of tabs.
5. Press the down arrow to highlight "RIGHT TAB."
6. Press the left or right arrow to identify the tab location.
7. Press the down arrow to highlight "LEFT TAB."
8. Press the left or right arrow to identify the tab location.
9. Continue with the third tab where applicable.

PROPULSION  TYPE

MERCURY

45148

TABS

NUMBER OF TABS

2

RIGHT TAB

STBD TAB 1

LEFT TAB

PORT TAB 2

a

b

c

d

Содержание VesselView Mobile




















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды