manualshive.com logo in svg

Mercury VesselView Mobile, Руководство пользователя

Поделиться
Скачать
Mercury VesselView Mobile Скачать руководство пользователя страница 38

Section 3 - Screen Overview and Operation 

Page  34

90-8M0070299   

eng

  MAY  2012

Outboard and Jet Drive Display Screens

Screen Category

Menu Screen

2‑Stroke Gas

Outboard

4‑Stroke Gas

Outboard

Gas Jet Drive

Gas Verado

Propulsion

Engine Status

X

X

X

X

Performance and

Fuel

X

X

X

X

Peak

Performance

X

X

X

X

Trim

X

X

X

Tab

X

X

X

X

Boost

Menu option (Verado only)

Troll Control

X

X

X

X

Cruise Control

Option (DTS only)

Smart Tow

Option (DTS only)

Vessel

Vessel Status

X

X

X

X

Tank Status

X

X

X

X

Generator

X

X

X

X

Environment and

Navigation

Depth

X

X

X

X

Trip Log

X

X

X

X

Fuel to Waypoint

GPS only

Navigation

GPS only

Maintenance

Maintenance

Limited models

only

Products with Emissions Control

Power packages with emissions control will display a small engine icon in the upper left‑hand corner of the display when an

emissions engine control fault is detected. The icon is a representation the power package has emissions control onboard

diagnostics, also known as OBD.

30258

Maintenance Option

Some 4‑Stroke power package models have the ability to estimate the amount of run time the engine accumulated since the

last scheduled maintenance. Normal scheduled maintenance for the engine is 100 hours. The maintenance screen shows an

icon in the shape of a wrench and a bar graph approximating the amount of time remaining before a scheduled maintenance is

required. When the maintenance screen is reset, the bar graph will change to represent the scheduled maintenance has 100

hours remaining. The maintenance screen must be turned on for this screen to be displayed. The menu path to turn this feature

on is: "Main" > "Settings" > "Screen Options" > "Maintenance."

Содержание VesselView Mobile




















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды