Mercury VesselView 7 Скачать руководство пользователя

Страница: 19 / 61

Section 2 - System Startup

90-8M0074777

eng

MAY 2013

Page 15

NOTE: Select the ID by the position of the installed VesselView (lowest to highest helm is recommended).

DEVICE SETUP

Unique VesselView ID:

Previous

Next

Helm ID:

50750

2. Press enter to open the Unique VesselView ID option. Highlight the ID number and press enter. Choose a number that is

different from the other numbers assigned to any other VesselView unit installed.

3. Highlight the HELM ID option and press enter.

NOTE: Use 1 for a single‑helm vessel. If a vessel has multiple VesselView units installed at different helms, the ID number

represents the helm location. Lowest to highest helm is recommended.

4. Highlight the helm ID selection and press enter.
5. Highlight Next and press enter to proceed to UNITS SETUP button.

Units Setup

UNITS SETUP allows you to choose the type of measurement you want to use: U.S. Standard or metric. After this configuration

setup is complete, you can change the type of measurement in the Settings menu. Changing the units in the Settings menu will

be covered in another section of this manual.
1. Press enter and highlight the desired type of measurement.
2. Press enter to confirm your selection and highlight Next. Press enter.

UNITS SETUP

What units of measure do you want to
use?

Previous

Next

Selects the general type of units of measure. You
can later change any particular unit of measure.:

U.S Standard

50822

3. The screen advises you that the configurations are almost complete and that they can be changed at any time in the

Settings menu. Press enter to finish the configuration or go back through the configuration steps.

4. After pressing enter, a Network screen will popup stating the data sources have not been set up and asks if you want to set

up the sources. Highlight OK or Cancel option and press enter.

5. Select OK and the screen will pop open and the system will auto select the data. All vessel NMEA 2K and CAN network

products must be turned on.

6. A progress bar shows the auto select elapsed time.

Содержание VesselView 7






























































Результаты поиска

Содержание VesselView 7

Отзывы:

Похожие инструкции для VesselView 7

Бренды по названию

Популярные бренды

Mercury VesselView 7, Руководство пользователя

Результаты поиска

Содержание VesselView 7

Отзывы:

Похожие инструкции для VesselView 7

Бренды по названию

Популярные бренды