Mercury VesselView 7 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 61

background image

Section 2 - System Startup

90-8M0074777

eng

MAY 2013

Page 13

IMPORTANT: Do not rush VesselView by pressing buttons while the system is booting up to acquire vessel and engine

data. When VesselView is initially started or after a factory reset, the system will take a few seconds to complete the boot

up process.

WELCOME

This is the first time VesselView has

been started and you will be guided
through configuring this device for

your vessel.

We recommend that you key on all

engines to ensure proper feature
configuration.

Next

52633

2. Press the rotary knob to continue.

Import Configuration

IMPORTANT: The import configuration option should only be used by an authorized OEM or dealership. It is used to import

configuration settings that were saved to a micro SD card. A micro SD card may contain several data files.
1. Insert the card into the card port.
2. Use the rotary knob to highlight the file on the screen and press the knob to start the upload.

IMPORTANT: Do not remove the card or turn the system off while the import is in process. Damage to the unit may result.

3. Remove the micro SD card after the configuration upload is complete.
4. If there is no configuration file or card in the port, highlight Next and press enter.

NOTE: If the imported configuration settings are correct for your power package, the setup process is complete.

Engine Setup

1. Use the rotary knob to highlight Engine Type and press the knob to enter.
2. Select the type of engine and press the knob to accept.

Available Types of Engines
None

2‑Stroke Gas Outboard

4‑Stroke Gas Outboard

Gas Sterndrive No Troll

Gas Inboard No Troll

Gas Jet Drive

Gas Sterndrive

Gas Inboard

Gas Verado

Diesel Sterndrive No Troll

Diesel Inboard No Troll

Diesel Inboard

3. Use the rotary knob to turn the malfunction indicator lamp on or off, and select the number of engines.
4. Use the rotary knob to highlight Previous or Next and press the knob to accept.

Display Setup

1. Use the rotary knob to select and change which engine to show on the display.
2. Use the rotary knob to highlight Previous or Next and press the knob to accept.

Unique VesselView ID

The unique VesselView ID differentiates each VesselView unit from all other installed SmartCraft devices. You must assign a

unique identifier to each VesselView unit and to designate whether the VesselView is installed at the primary (helm ID 1) or

secondary helm.
Use the rotary knob to highlight and accept changes.
IMPORTANT: Do not choose the same unique VesselView ID for multiple VesselView installations.

NOTE: Select the ID by the position of the installed VesselView (lowest to highest helm is recommended).

«
...
15
16
17
18
19
...
»

Содержание VesselView 7






























































Отзывы:

Нет отзывов

Похожие инструкции для VesselView 7

Бренд: Calistair Страницы: 44

Бренд: Bartscher Страницы: 28

Бренд: Bartscher Страницы: 13

Бренд: IBEX Страницы: 10

Бренд: M-system Страницы: 12

Бренд: Harken Страницы: 4

Бренд: Harken Страницы: 2

TERRA FORCE BOOM

Бренд: Hardi Страницы: 40

Бренд: Harken Страницы: 4

QuickSlide HemaPRO

Бренд: Hardy Diagnostics Страницы: 2

Бренд: Hardt Страницы: 2

Бренд: Ultimate Healthcare Страницы: 2

Бренд: Ultimate Healthcare Страницы: 40

Бренд: H&S Страницы: 54

Бренд: Samson Страницы: 2

Бренд: Y.I.C. TECHNOLOGIES Страницы: 6

Exitronix LEMD Series

Бренд: BARRON Страницы: 6

Бренд: ubicquia Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды