Mercury TDI 4.2L, Руководство пользователя

Страница: 9 / 89

Section 1 - Getting to Know Your Power Package
90-8M0114081
eng
DECEMBER 2015 Page 3
If the alarm sounds, stop the engine immediately if you are not in a hazardous situation. Investigate the cause and correct it, if
possible. If you cannot determine the cause, consult your Mercury Diesel authorized repair facility.
Testing the Audio Warning System
1. Turn the ignition switch to the "RUN" or 1 position; do not start the engine.
2. Push the audio test switch toggle lever down and hold it.
3. Listen for the alarm. The alarm will sound if the system is functioning correctly.
Digital Throttle and Shift
Digital Throttle and Shift (DTS) operating instructions are provided in a separate manual. Refer to Mercury Diesel's
SmartCraft
and DTS Operator's Manual
.
Instrumentation
VesselView
Your power package may be connected to a SmartCraft VesselView display. VesselView 7 is a comprehensive boat
information center that can display information for up to four gasoline or diesel engines. It continuously monitors and reports
basic operating data including detailed information such as seawater temperature and depth, trim status, boat speed and
steering angle, and the status of fuel, oil, water, and waste tanks.
VesselView can be fully integrated with a vessel’s global positioning system (GPS) or other NMEA‑compatible device to provide
up‑to‑the‑minute navigation, speed, and fuel‑to‑destination information.
VesselView 4 and 7 are equipped with a micro SD card port that allows an authorized OEM or dealership to import the
personality configuration. It can also be use by the owner to import pictures or graphics. When more than one VesselView is
used, either as a triple or quad‑engine application for multiple helms, the same mico SD card can be used to download those
configurations.
52421
VesselView
Refer to your VesselView operations manual for detailed instructions on how to operate this display.
SmartCraft Speedometer, Tachometer, and Digital Gauges
The SmartCraft instrument package augments the information provided by VesselView. The instrument package may display:
•
Engine RPM
• Boat speed
• Coolant temperature
• Oil pressure
• Battery voltage
• Fuel consumption
• Engine operating hours