Mercury MerCruiser Axius 350 MAG, Руководство пользователя

Страница: 71 / 151

Section 3 - On The Water
90-864197084 NOVEMBER 2008 Page 63
4. Press the "SKYHOOK" button to engage Skyhook.
a - Indicator light
b - "SKYHOOK" button
5. A safety popup (warning screen) appears on VesselView.
33920
Skyhook warning screen on VesselView
6. To acknowledge that you understand the warning on the screen and close the safety popup, press the enter button on
VesselView. The enter button is the button with the check mark on it.
7. When the Skyhook system engages, a one second solid horn beep sounds one time. The "SKYHOOK" button light stops
blinking and remains on once Skyhook is engaged.
8. The VesselView "SKYHOOK" screen displays a green circle with the word "ON" when Skyhook engages. See
The Skyhook
Screen in VesselView
information.
9. When Skyhook is engaged you must remain at the helm and maintain a vigilant watch. Disengage Skyhook if anyone enters
the water or approaches the boat from the water.
10. Press the "SKYHOOK" button a second time to put Axius Premier in standby. All lights other than "STANDBY" turn off.
11. To disengage Skyhook, you must choose one of the following methods:
• Press the "SKYHOOK" button on the Axius Premier Trackpad.
• Move any ERC lever out of neutral.
• Move the joystick.
A single horn beep sounds when the feature disengages. See
Disengaging Skyhook
for complete details.
The Skyhook Screen in VesselView
In Skyhook mode VesselView displays a special Skyhook screen. The elements of the Skyhook screen are:
•
RPM of the engines.
• The rotation angle of the boat icon shows the yaw of the boat relative to its position when Skyhook was first engaged.
35570
a
b