130.021UK User Manual
INTRODUCTION:
Thank you for choosing this Mercury aerial. This aerial is designed for the reception of FM, DAB and UHF
digital TV signals. It is designed to clamp onto a satellite dish and does not need a mast. With a built-in
low noise signal amplifier and mixer, it boosts the signals and transmits them along the same coax cables
as the satellite signals.
With dual outputs, this aerial is suitable for twin LNB installations.
SPECIFICATION:
Power Supply:
Via satellite receiver (13 – 18Vdc 60mA)
Frequency Range:
VHF: 87.5 – 230MHz, UHF: 470 – 862MHz
Gain:
VHF: 26dB, UHF: 24dB
Impedance:
75Ω
Connector:
2 x SAT input (950 – 2150MHz), 2 x Mix output
Insertion Lost:
3dB
Dimensions & weight
700 x 180 x 110mm, 450g
PRODUCT FEATURES:
-
Tool free installation, easily installed onto existing satellite dish.
-
Built in high gain low noise amplifier with DC pass to power the amplifier and LNB from
the satellite receiver.
-
Built in signal mixer combines the satellite and terrestrial signals and transmits them down
the cables, saving material and labour costs.
-
Supplied with diplexers to split satellite and terrestrial signals to feed a set top box and
satellite receiver.
-
Wideband frequency response compatible with FM/DAB/DTV(DVB-T, ATSC, ISDB-T, T-
DMB)
INSTALLATION:
Please note, before installation turn the satellite receiver off and unplug from the mains supply. Take care
not to alter the satellite dish position during installation, otherwise realignment may be required.
Step 1:
Gently pull the elements apart from each other and detach one side of each of the mounting clamps from
the aerial element.