background image

 

 

This publication, including all photographs, illustrations and 
software, is protected under international copyright laws, with all 
rights reserved. Neither this manual, nor any of the material 
contained herein, may be reproduced without written consent of the 
author. 
The information in this document is subject to change without 
notice. The manufacturer makes no representations or warranties 
with respect to the contents hereof and specifically disclaims any 
implied warranties of merchantability or fitness for any particular 
purpose. Further, the manufacturer reserves the right to revise this 
publication and to make changes from time to time in the content 
hereof without obligation of the manufacturer to notify any person 
of such revision or changes. 

Trademarks 

IBM, VGA, and PS/2 are registered trademarks of International 
Business Machines. 
Intel, Pentium/II/III, Pentium 4, Celeron and MMX are registered 
trademarks of Intel Corporation. 
Microsoft, MS-DOS and Windows 98/ME/NT/2000/XP are 
registered trademarks of Microsoft Corporation. 
PC-cillin is a registered trademark of Trend Micro Inc. 
AMI is a registered trademark of American Megatrends Inc. 
SiS is a trademark of Silicon Integrated System Corporation. 
Other brands or product names in this manual are trademarks or the 
properties of their respective owners and are acknowledged. 
 
 
 
 
 
 
 
 
 

Copyright © 2004 

All Rights Reserved 

KVM400M-L Series, V1.3A 

KM400/January 2004 

Содержание KVM400M-L









































Отзывы: