manualshive.com logo in svg

Mercury 8.2 H.O. ECT, Руководство пользователя, Страница: 37 / 94

Поделиться
Скачать
Mercury 8.2 H.O. ECT Скачать руководство пользователя страница 37

Section 2 - Getting to Know Your Power Package

90-8M0061999   

eng

  MAY  2012

Page  29

The power harness connected to the engine starting battery minimizes voltage drop to the electrical system and is protected by

a 5‑amp fuse.

a -

Paddle wheel and tank level connector

b -

Diagnostic connector

c -

14‑pin harness connector

d -

Power harness connector

e -

Transom harness connector

Visual and Audio Warning Systems

Service Engine Light and OBD‑M MIL Kit

Boats powered by Emissions Control Technology (ECT) catalyzed engines must be equipped with a SmartCraft‑enabled gauge

capable of displaying the service engine icon, or a dash mounted service engine light. Malfunction indicator lamp (MIL) kits

containing a dash mounted service engine light and a special harness that connects to the engine harness may be purchased

separately.
The service engine icon or MIL will provide a visual indication of a malfunction with the engine's emission control system and

will remain illuminated while the OBD‑M fault is active.

47594

SC 1000 gauge and service engine light

Testing the OBD-M Malfunction Indicator Lamp (MIL)

1. Turn the ignition switch to the on position without cranking the engine.
2. The service engine icon and MIL will remain illuminated for four seconds if the visual indication system is functioning

correctly.

Audio Warning System

IMPORTANT: The audio warning system alerts the operator that a problem has occurred. It does not protect the engine from

damage.
The Mercury MerCruiser power package may be equipped with an audio warning system. Most faults cause the warning horn

circuit to activate. How the warning horn activates depends on the severity of the problem.
There are two warning horn states:
•

Caution

•

Severe

a b c d e

43057

Содержание 8.2 H.O. ECT































































































Отзывы:

Нет отзывов