Mercury 71712, Руководство по эксплуатации

Страница: 27 / 30

Updating Through Wi‑Fi
NOTE: Updating the ERC via Wi‑Fi can take 20 minutes or longer with a phone or PC. Make sure the phone will remain awake
for the software to be loaded into the ERC. If the phone closes (sleep) while the download is in process, you will need to start
the process over from the beginning.
IMPORTANT: All Premier dual‑handle ERCs include a factory installed USB Wi‑Fi dongle.
1. Download the ERC display update file at Mercury's website
www.mercurymarine.com and save it to the device that will be
performing the update. We recommend updating with a PC but a mobile device could be used.
2. On the supplemental display, navigate to
MENU
>
Settings
>
Wi ‑ Fi
.
3. The display will show the ERC network address (name) and password. For multiple helm applications: each ERC will have
a different address and password.
NOTE: The password will remain the same for future updates unless it is manually changed. To change the password,
highlight
Regenerate Password
and press
ENTER
.
a - Network address (name)
b - Password
c - Regenerate Password
4. From the PC or mobile device, search for available Wi‑Fi connections.
5. Select the network that matches the network name on the ERC display. When prompted, enter the password from the ERC
display to gain access to the ERC Wi‑Fi network.
6. Open a browser window and type
hotspot.mercurymarine.com
in the search bar and press
ENTER
.
NOTE: You must use the ERC network to access hotspot.mercurymarine.com.
7. The Mercury Marine software update site should open.
8. From the
Software Update
window, select the update file or drag and drop the file to start the update.
NOTE: The download process can take over 20 minutes to complete.
73172
73109
a
b
c
Section 2 - Premier ERC Display Software Update
Page 22 90-8M0180922
eng
MAY 2021