Mercury 5.7 TowSport MPI, Руководство пользователя

Страница: 71 / 87

Section 6 - Storage
90-8M0086943
eng
DECEMBER 2014 Page 63
d. Fuel‑cooler‑to‑thermostat‑housing hose
a - Drain plug
e. Check valve
a - Drain plug (if equipped)
3. On models with a seawater pickup pump, remove the two blue drain plugs. If the seawater pickup pump does not have
blue drain plugs, or you are unable to access them, loosen the clamps and remove both hoses.
a - Hose clamps
b - Blue drain plugs
4. Crank the engine over slightly with the starter motor to purge any water trapped in the seawater pickup pump. Do not allow
the engine to start.
5. Before launching the boat or starting the engine, close the drain system by installing the blue drain plugs.
6. Open the seacock, if equipped, or unplug and reconnect the water inlet hose before operating the engine.
Battery Storage
Whenever the battery will be stored for an extended period of time, be sure the cells are full of water and the battery is fully
charged and in good operating condition. It should be clean and free of leaks. Follow the battery manufacturer's instructions for
storage.
a
6144
a
6131
6145
b
a