Mercury 200 OptiMax DTS, Руководство пользователя

Страница: 87 / 157

FEATURES AND CONTROLS
eng
75
Synchronizing Helms Prior to Transfer
Pressing the "TRANSFER" button allows the boat operator 10
seconds to match up the control handle settings at the new helm
with the handle settings that are at the old (to be inactive) helm.
If the handles are not matched, the neutral lights will flash. The
light blinks faster as the handles are nearing match position.
Once the light stays on continuously, the handles are matched
and the button can be pressed again to complete the transfer.
This completes the transfer process, and gives control to the
new station. If the helm transfer is not completed within 10
seconds, the action will be cancelled.
Shadow Mode Control Features and Operation
TRIPLE ENGINE THROTTLE AND SHIFT OPERATION
Movement of the handles on the remote control allows the boat
operator to control the engine throttle speed and gear shift
positions of all three engines.
The throttle and shift function is dependant on what engines are
running. Refer to the following table.
Port Engine
Center
Engine
Starboard
Engine
Control Handle Function
Running Running Running
Port engine throttle and shift =
controlled by port control handle
Starboard engine throttle and shift
= controlled by starboard control
handle
Center engine throttle = average of
port and starboard engines
Center engine shift = neutral
unless both engines are in the
same gear
Running Running Off
Port and center engine throttle and
shift = controlled by port control
handle
Off Running Running
Starboard and center engine
throttle and shift = controlled by
starboard control handle