Mercury 200 OptiMax DTS Скачать руководство пользователя страница 119

Страница: 119 / 157

OPERATION

eng

107

DTS CONSOLE MOUNT REMOTE CONTROL

IMPORTANT: Never shift outboard into gear unless engine

speed is at idle. Do not shift outboard into forward or reverse

when the engine is not running.

• The outboard has three gear shift positions to provide

operation: Forward (F), Neutral (N), and Reverse (R).

3417

• When shifting, always stop at neutral position and allow the

engine speed to return to idle.

• Advance the control lever to further increase speed.

Stopping the Engine

IMPORTANT: Turning key to the "START" position while the

engine is running will result in engine shut down, while leaving

the DTS system active. This will allow the use of the power trim/

tilt from the remote control handle.
Reduce engine speed and shift outboard to neutral position. Turn

ignition key to "OFF" position.

F ACC ON

F A

CC ON

3482

Содержание 200 OptiMax DTS






























































































































































Результаты поиска

Содержание 200 OptiMax DTS

Отзывы:

Похожие инструкции для 200 OptiMax DTS

Бренды по названию

Популярные бренды

Mercury 200 OptiMax DTS, Руководство пользователя

Результаты поиска

Содержание 200 OptiMax DTS

Отзывы:

Похожие инструкции для 200 OptiMax DTS

Бренды по названию

Популярные бренды