Mercury Racing HP565, Руководство пользователя, Страница: 63 / 151

OPERATION
eng
51
The Quicksilver MerCathode System has a 5‑amp in‑line fuse in
the wire which connects to the positive (+) terminal on controller.
If the fuse is open, the system will not operate and will not
protect against corrosion.
Remote Controls (Console Mounted Zero Effort)
1. Shift only with the engine at idle speed. Always move to the
desired gear position with a quick, firm motion.
2. The throttle control handle friction is adjustable using a 5/16
in. hex head wrench; clockwise increases friction.
a - Trim switch
b - Port friction adjustment
c - Starboard friction adjustment
Starting, Shifting, and Stopping
!
WARNING
Explosive fumes contained in the engine compartment can
cause serious injury or death from fire or explosion. Before
starting the engine, operate the bilge blower or vent the engine
compartment for at least five minutes.
NEW ENGINES OR ENGINES COMING OUT OF STORAGE
Refer to
Power Package Recommissioning.
IMPORTANT: Observe the following:
• Do not start the engine without supplying water to the
seawater pickup pump (to prevent pump or engine damage).
• Never shift the drive unit unless the engine is at idle RPM.
Perform the following as appropriate:
Check all items listed in
Operation Chart.
Perform any other necessary checks, as indicated by your
dealer, or specified in your boat owner's manual.
Place the drive unit in the full down/in position.
a
b
c
45691