Mercury Racing HP565, Руководство пользователя, Страница: 57 / 151

OPERATION
eng
45
• SysVolt_RangeHigh
• SysVolt_RangeLow
• IAT_RangeHigh
• IAT_RangeLow
• StbdECT_RangeHigh
• StbdECT_RangeLow
• EncoderFault
• CrankCamTrigger
NOTICE
The engine must start to clear the fault using the following procedure.
To clear the fault, the engine must be started three times. If the
horn still sounds after three start cycles, the fault still exists. See
your authorized Mercury dealer to fix the problem and clear the
fault.
Electrical System Overload Protection
If an electrical overload occurs, a fuse will blow or the circuit
breaker will trip open. The cause must be found and corrected
before replacing the fuse or resetting the circuit breaker.
NOTE: In an emergency, when you must operate the engine and
cannot locate the cause for the high current draw, turn off or
disconnect all accessories connected to the engine and
instrumentation wiring. Reset the circuit breaker. If the breaker
remains open, the electrical overload has not been eliminated.
Contact your authorized dealer.
The circuit breaker provides protection for the engine wiring
harness and the instrumentation power lead. To test or reset the
circuit breaker:
1. Reset the breaker by pushing the red button back into the
housing.