Mercury Racing HP565 Скачать руководство пользователя страница 114

Страница: 114 / 151

MAINTENANCE

102

eng

3. Remove the belt and route the replacement belt according

to the belt routing diagram.

4. Carefully release the tensioner and ensure that the belt

stays positioned properly.

5. Check the belt tension.

Description

Deflection

13 mm (½ in.)

Water‑Separating Fuel Filter

WARNING

Fuel is flammable and explosive. Ensure that the key switch is

off and the lanyard is positioned so that the engine cannot

start. Do not smoke or allow sources of spark or open flame in

the area while servicing. Keep the work area well ventilated

and avoid prolonged exposure to vapors. Always check for

leaks before attempting to start the engine, and wipe up any

spilled fuel immediately.

CAUTION

Failure to release pressure from the fuel system will result in

fuel spraying out, which can cause a fire or explosion. Allow

the engine to cool completely and release all fuel pressure

before servicing any part of the fuel system. Always protect

eyes and skin from pressurized fuel and vapors.

1. Use moderate thumb pressure on the belt at the location that has the longest

distance between two pulleys.

Содержание HP565
























































































































































Результаты поиска

Содержание HP565

Отзывы:

Mercury Racing HP565, Руководство пользователя, Страница: 114 / 151

Результаты поиска

Содержание HP565

Отзывы: