manualshive.com logo in svg

Mercury Racing 1350 STERNDRIVE, Эксплуатация, обслуживание и гарантия, Страница: 50 / 73

Поделиться
Скачать
Mercury Racing 1350 STERNDRIVE Скачать руководство пользователя страница 50

6 - M

AINTENANCE

90-8M0114811   JANUARY  2016

45

1
2
3
4
5
6
7
8
9

Tube Ref

No.

Description

Where Used

Part No.

122

Extended Life

Antifreeze/

Coolant

Closed cooling system

92-877770K1

C

HANGING

 F

LUIDS

C

HANGING

 C

RANKCASE

 O

IL

 (R

ESERVOIR

) 

AND

 F

ILTERS

This procedure is the preferred method for servicing the engine oil

supply system. If there is limited access to the oil pump, change the

fluid in the oil tank and replace the oil filter. The amount of oil needed

when not using the oil pump to scavenge the oil from the engine is

approximately 9.5 Liter (10 US qt).

1. Place a sufficiently sized container, 19 Liter (20 US qt) below

the oil reservoir.

2. Remove the plug from the reservoir bottom and let the oil drain.

a -

Oil drain plug

a

7436

3. Loosen the oil pump mounting bolts and remove the belt. Using

an electric drill, manually turn the oil pump pulley (clockwise) to

discharge any remaining engine oil into the reservoir to be

drained.

4. To replace the spin‑on oil filter: Loosen the filter approximately

¼ turn and wait one minute for the oil to drain into the engine

sump, then remove it.

5. Replace it with a new filter. Be sure to lubricate the seal with

clean engine oil before installing it.

6. Remove the cover of the screen‑style filter and mark the

element so it can be returned to its original orientation with the

correct side up. Clean the element with solvent.

IMPORTANT: The screen‑style filter element must always be

returned to its original orientation (correct side up) to prevent the oil

from flowing through it in the wrong direction.

a -

Oberg screen‑style filter

a

7441

Содержание 1350 STERNDRIVE










































































Отзывы:

Нет отзывов