background image

 Remote Control Batteries:

The remote uses a CR2025 button cell battery (included). To 

replace this battery when it is exhausted, follow these steps.

1.  Slide out battery tray.

2.  Remove old battery and replace with new battery. Be         

certain that the battery is positioned so that the smooth side (+) 

is towards the back of the remote.

3.  Close battery tray and secure.

Mist  –  When the power button is turned on, the mist is 

continuous. Press the mist button once to engage 

intermittent mode, press again to turn mist off.
Light  – Turns on the light. The color will slowly shift in a 

soothing pattern. A second press will freeze the color at 

its current hue. Additional presses will cycle through a 

range of colors that will not change. The pale color after 

red is the shifting color mode. Hold for 3 seconds to turn 

this feature off.
Brightness – Progressively dims the light. The third push 

will restore full brightness.
Power – Turns the diffuser on or off.
Audio – Choice of two soothing tunes or two sets of 

nature sounds. Cycle through the options by pushing this 

button. Hold for 3 seconds to turn this feature off.
Increase/Decrease Volume – Adjusts sound level.
Timer – Set the diffuser to shut off after 1, 3 or 6 hours. 

An indicator light, visible when the ceramic shell is 

removed, will indicate which mode is selected.
Note: The diffuser will shut down if the water is depleted 

before the timer expires.

Functions

Use the remote to control the diffuser’s advanced features.

Contents:

Ultrasonic Diffuser

Power Adapter

Remote Control

3 Essential Oil Bottles

Basic Setup:

1. Plug the power cord into the power port on the bottom of the 

diffuser.

2. Fill the tank with room temperature water. Do not fill past the 

maximum fill line. Distilled water is recommended.

3. Add 4-5 drops of essential oils. Add more drops for a stronger 

scent.

4. Put diffuser lid in place.

5. Place diffuser in desired location. Do not place anything on diffuser 

or place diffuser under anything.

6. Plug adapter into power source, making sure that cable is not a 

tripping hazard.

7. Press power button on the underside or use the remote (see 

“Remote Control” on the following page).

8. Place decorative cover on diffuser.

    • When the diffuser is turned on, colorful LEDs will cycle through a 

spectrum of colors.

    • Diffuser will automatically shut off when water level gets too low.

    • After auto shut off, the lights and music can be turned back on 

without refilling tank.

    • Remember to remove the power cord when not in use.

Timer:

After the diffuser is turned on, pressing the power button will 

activate one of the timer modes. Select 1, 3, or 6 hours.

Power

Indicator

Timer Mode

Indicator

1 / 3 / 6 hrs

Mist

Power

Timer

Light

Brightness

Decrease Volume

Increase Volume

Audio

ULTRASONIC DIFFUSER BLUETOOTH 360ml 

Printed in China

Max Fill Line

Page 1

Отзывы: