Mercedes-Benz Zetros 2020, Руководство по эксплуатации

Страница: 165 / 212

X Press locking tabs
?
together and push
wiper blade
:
out of the hook section of
wiper arm
;
in the direction of arrow
=
.
X
Remove wiper blade
:
.
X To fit the wiper blade: push the hinge
piece of the wiper blade into the curvature
of wiper arm
;
in the direction of arrow
A
until you hear the locking springs engage.
X
Press the wiper blade fully into the hook on
wiper arm
;
until you hear the locking tabs
engage.
X
Turn wiper blade
:
parallel to wiper
arm
;
.
X Fold wiper arm
;
onto the windscreen
again.
Dust collector
X
When emptying dust collector
:
, use the
steps and grab handles intended for this
purpose (
Y
page 153).
X Unscrew wing nut
A
of dust collector
:
.
X
Pull cover
?
upwards and remove it.
X Pull dust container
=
upwards and remove
it.
X
Empty and clean dust container
=
.
X
Place dust container
=
on main body sec-
tion
;
.
X Place cover
?
on dust container
=
.
X
Place wing nut
A
onto the threaded pin of
main body section
;
and tighten it.
Dust collector
:
removes dust and water
from the air, thus relieving the air filter. At the
latest, you must clear out dust collector
:
when the marking (arrow) is full.
Replacing the engine air cleaner
Important safety notes
! Only replace the engine air cleaner in a
low dust environment so that no dust can
enter the engine and cause damage.
! Do not clean the filter elements of the
engine air cleaner. Knocking, blowing out or
washing the filter medium could cause
structural changes and damage. The neces-
sary filtration grade of the filter element is
then no longer guaranteed. This results in
increased wear and tear and a reduced ser-
vice life for the engine. Replace the air filter
elements. Otherwise, you will lose your war-
ranty entitlements and you can damage
then engine.
Maintenance
163
Maintenance and care
Z