Mercedes-Benz Zetros 2020, Руководство по эксплуатации

Страница: 117 / 212

Overview
È
Selects the speed limiter
Ñ
Activates and sets the current limit
speed/increases the set limit speed
q
Activates and calls up the stored limit
speed/decreases the set limit speed
é
Selects cruise control (
Y
page 116)
o
Deactivates the speed limiter
The
È
symbol in the on-board computer
shows the status of the speed limiter by col-
our:
R
Grey symbol: the speed limiter is selected,
but not activated.
R
White symbol: the speed limiter is active
and is restricting the vehicle speed to the
set limit speed.
Activating
Functions and activation conditions
The speed limiter restricts the vehicle speed to
the set limit speed. It is possible to accelerate
the vehicle up to the set limit speed using the
accelerator pedal. In order to keep the set
limit speed on downhill gradients, the speed
limiter automatically brakes the vehicle with
the continuous brake. If the set speed is
exceeded, the
È
symbol in the on-board
computer flashes.
If the speed limiter cannot be activated, the
on-board computer will display
- - - km/h
in
grey.
Selecting the speed limiter
X Press the
È
button.
The on-board computer shows the
È
symbol in grey.
Activating when driving
X
Select the limiter.
X
Drive at the desired speed and briefly press
the
Ñ
button.
The speed limiter is activated and the cur-
rent vehicle speed is stored as the limit
speed.
or
X Briefly press the
q
button.
The speed limiter is activated and assumes
the stored limit speed.
The on-board computer shows the
È
symbol and the set limit speed in white.
Increasing/decreasing the limit speed
You can change the settings of the limit speed
while driving.
X
Activate the speed limiter.
X
To adjust in 1 km/h increments: press
the
q
or
Ñ
button repeatedly until
the desired speed is shown in the on-board
computer.
or
X
To adjust in 5 km/h increments: press
and hold the
q
or
Ñ
button until the
desired speed is shown in the on-board
computer.
Driving
It is possible to exceed the set limit speed,
e.g. when overtaking:
X Briefly depress the accelerator pedal
beyond the point of resistance (kickdown).
The set limit speed is still shown and the
È
symbol flashes in the on-board com-
puter.
X
When overtaking is completed, briefly
release the accelerator pedal and depress it
again.
The speed limiter again restricts the vehicle
speed to the set limit speed.
Deactivating
The limit speed remains stored if you deacti-
vate the speed limiter.
Driving systems
115
Driving mode
Z