Mercedes-Benz Sprinter, Руководство по эксплуатации

Страница: 90 / 354

%
This period of time is shortened if there is
undervoltage in the starter battery.
%
If the body manufacturer lamps have been
switched off automatically to protect the bat-
tery, restart the vehicle before switching them
on again.
%
The body manufacturer lamps can be switched
on only when the battery voltage is stable.
#
To switch the front right reading lamp on/off:
press button 5 .
Adjusting interior lighting on bus equipment
1 i
Activates/deactivates the bus function
2
p
Switches the front left reading lamp
on/off
3
|
Activates/deactivates automatic interior
lighting control
4
c
Switches the front interior lighting
on/off
5
w
Switches passenger compartment light-
ing on/off
6
p
Switches the front right reading lamp
on/off
7
j Activates/deactivates reading lighting in
the passenger compartment
#
To activate the bus function: press button 1 .
The LED will light up.
The bus function will be in one of the following
modes:
R
Stop mode
If the vehicle comes to a standstill at a
stop, for example, and the passenger door
opens, the passenger compartment will be
illuminated (undimmed).
R
Driving mode
If all doors are closed and the vehicle is
traveling faster than walking pace, the
passenger compartment will be illuminated
(dimmed).
R
Automatic off mode
If automatic interior lighting control
3 is
deactivated, thereby activating automatic
off mode, the passenger compartment will
be continuously illuminated (dimmed).
When the bus function is activated, the modes can
be selected via button 5 that switches passenger
compartment lighting on/off. Passenger compart-
ment lighting will then be deactivated completely.
When button 5 is pressed again to switch
passenger compartment lighting on/off, the bus
function will again be in one of the modes.
R
If automatic interior lighting control 3 was
previously activated, automatic off mode will
be inactive again.
R
If automatic off mode was not previously acti-
vated, either driving or stop mode will be
active.
%
The bus function can be operated independ-
ently of button 5 that switches passenger
compartment lighting on/off. The passenger
compartment lighting must not be switched on
beforehand.
#
To deactivate the bus function: press button
1 .
The LED will not light up.
#
To switch the front left reading lamp on/off:
press button 2 .
#
To deactivate automatic interior lighting con-
trol: press button 3 .
Interior lighting control will switch on automati-
cally if you do the following, for example:
R
Unlock the vehicle
R
Open a door
#
To switch the front interior lighting on/off:
press button 4 .
#
To switch passenger compartment lighting on
or off: press button 5 .
#
To switch the front right reading lamp on/off:
press button 6 .
88 Light and vision