Mercedes-Benz GLS 2023, Руководство оператора

Страница: 398 / 538

The wear patterns on the front and rear wheels
differ:
R
Front wheels wear more on the tire shoulder
R
Rear wheels wear more in the center of the
tire
Do not drive with tires that have too little tread
depth. This significantly reduces traction on wet
roads (hydroplaning).
On vehicles that have the same size front and rear
wheels, rotate the wheels according to the inter-
vals in the tire manufacturer's warranty book in
your vehicle documents. If this is not available,
rotate the tires every 3,000 to 6,000 miles
(5,000 to 10,000 km), depending on the wear.
Ensure that the direction of rotation is main-
tained.
Notes on storing wheels
When storing wheels, observe the following notes:
R
After removing wheels, store them in a cool,
dry and preferably dark place.
R
Protect the tires from contact with oil, grease
or fuel.
Overview of the tire-change tool kit
Apart from some country-specific variants, vehi-
cles are not equipped with a tire-change tool kit.
For more information on which tools are required
and approved to perform a wheel change on your
vehicle, consult a qualified specialist workshop.
Required tire-changing tools may include,
forexample:
R
Jack
R
Chock
R
Lug wrench
Tire-change tool kit 1 is located under the cargo
floor.
%
Depending on the model, the tire change tool
kit may be located in other positions under
the cargo floor.
The tire-change tool kit includes the following:
R
Jack
R
Lug wrench
R
Wheel studs
R
Extension attachment for wheel studs, if nec-
essary (depending on vehicle version)
R
Folding chock
R
Ratchet wrench
Preparing the vehicle for a wheel change
Requirements:
R
The vehicle is not on a slope.
396 Wheels and tires