Mercedes-Benz GLS 2023, Руководство оператора

Страница: 208 / 538

#
Check that the transmitter frequency of the
remote control has a frequency range of 280
to 868 MHz.
Radio equipment approval number:
R
NZLMUAHL5 (USA)
R
4112A-MUAHL5 (Canada)
#
Press and hold button
1
,
2
or
3
that you
wish to program.
Indicator lamp 4 will flash yellow.
%
It can take up to 20 seconds before the indi-
cator lamp flashes yellow.
#
Release the button previously pressed.
Indicator lamp 4 will continue to flash yellow.
#
Point remote control 5 from a distance of
0.4 in (1 cm) to 3 in (8 cm) towards button
1 , 2 or 3 .
#
Press and hold button 6 of remote control
5 until one of the following signals appears:
R
Indicator lamp 4 lights up green continu-
ously. Programming is complete.
R
Indicator lamp 4 flashes green. Program-
ming was successful. Additionally, the roll-
ing code must be synchronized with the
door system.
#
If indicator lamp 4 does not light up or flash
green: repeat the procedure.
#
Release all of the buttons.
%
The remote control for the door drive is not
included in the scope of delivery of the garage
door opener.
Synchronizing the rolling code
Requirements
R
The door system uses a rolling code.
R
The vehicle must be within range of the garage
door or door drive.
R
The vehicle as well as persons and objects are
located outside the range of movement of the
door.
#
Press the programming button on the door
drive unit.
Initiate the next step within approximately
30 seconds.
#
Press previously programmed button 1 , 2
or
3
repeatedly until the door closes.
When the door closes, programming is com-
pleted.
%
Please also read the operating instructions for
the door drive.
206 Driving and parking