Mercedes-Benz GLE 350 4MATIC 2020, Руководство оператора

Страница: 167 / 650

R
Only increase the engine speed gradually and
accelerate the vehicle to full speed after
1,000 miles (1,500 km).
This also applies when the engine or parts of the
drivetrain have been replaced.
Please also observe the following breaking-in
notes:
R
In certain driving and driving safety systems,
the sensors adjust automatically while a cer‐
tain distance is being driven after the vehicle
has been delivered or after repairs. Full sys‐
tem effectiveness is not reached until the
end of this teach-in process.
R
Brakepads, brake discs and tires that are
either new or have been replaced only ach‐
ieve optimum braking effect and grip after
several hundred kilometers of driving. Com‐
pensate for the reduced braking effect by
applying greater force to the brake pedal.
Notes on optimized acceleration
If all necessary requirements and activation con‐
ditions are fulfilled, the best possible accelera‐
tion can be achieved from a standstill.
Do not use the optimized acceleration on public
roads. Individual wheels could spin and you
could lose control of the vehicle. There is an
increased risk of skidding and/or accident.
Be sure to observe the safety notes and informa‐
tion on ESP
®
(
/
page 198).
Pulling away with optimized acceleration
& WARNING Risk of skidding and having
an accident from wheels spinning
When you use optimized acceleration, indi‐
vidual wheels could spin and you could lose
control of the vehicle.
If ESP
®
is deactivated, there is a risk of skid‐
ding and accident.
#
Make sure that no persons or obstacles
are in the close vicinity of your vehicle.
Requirements:
R
The vehicle has been broken in
(
/
page 164).
R
The vehicle and tires are in good condition.
R
You are on a high-grip roadway.
R
The engine and transmission are at normal
operating temperature.
*
NOTE Increased wear due to optimized
acceleration
When pulling away with optimized accelera‐
tion, all components of the drivetrain are
subjected to a very high load.
This can lead to increased component wear.
#
Do not always pull away with optimized
acceleration.
#
Engage the
h
drive position (
/
page 181).
#
Move the steering wheel to the straight-
ahead position.
#
Select the sportiest available drive program
B or C (
/
page 177).
Driving and parking 165