Mercedes-Benz EQV 2021, Руководство пользователя

Страница: 169 / 300

You can choose between the following settings:
R
Off
R
Standard : normal system sensitivity.
R
Sensitive : higher system sensitivity. The driver
is warned earlier and the attention level detec-
ted by the system is adapted accordingly.
Traffic Sign Assist
▌ Function of Traffic Sign Assist
Traffic Sign Assist aids you by displaying detected
speed limits and overtaking restrictions in the
instrument cluster.
Since Traffic Sign Assist also uses the data stored
in the navigation system, it can update the display
in the following situations without detecting traffic
signs (country-specific).
The camera also detects traffic signs with a restric-
tion indicated by an additional sign (e.g. when
wet).
%
Traffic signs are only displayed with the restric-
tion indicated by an additional sign in the fol-
lowing cases:
R
the traffic signs must be observed with the
restriction
R
the system is unable to clearly determine
whether the restriction applies
If the system detects that you are driving onto a
section of road in the wrong direction of travel, it
triggers a warning. This function is not available in
all countries.
Traffic Sign Assist is only an aid and is not always
able to correctly display speed limits and overtak-
ing restrictions. The actual traffic signs always
have priority over the Traffic Sign Assist display.
Observe the notes on driving systems and your
responsibility; you may otherwise fail to recognise
dangers ( / page 148).
Instrument cluster display
The Traffic Sign Assist display appears in the
Assis-
tance graphic menu of the on-board computer
(
/
page 175).
1
Permissible speed
2
Permissible speed when there is a restriction
3
Additional sign with restriction (example:
unknown restriction)
If Traffic Sign Assist is not available or cannot
determine the maximum permissible speed, the
following display appears in the assistance
graphic:
System limits
The system may be impaired or may not function in
the following situations:
R
If there is poor visibility, e.g. due to insufficient
illumination of the road, highly variable shade
conditions, rain, snow, fog or heavy spray.
R
If there is glare, e.g. from oncoming traffic,
direct sunlight or reflections.
R
If there is dirt on the windscreen in the vicinity
of the multifunction camera or if the camera is
misted up, damaged or obscured.
R
If the traffic signs are hard to detect, e.g. due
to dirt, snow or insufficient lighting, or because
they are covered.
R
If signs are ambiguous, e.g. road signs in road-
works or in adjacent lanes.
R
If the information in the navigation system's
digital map is incorrect or out-of-date.
▌ Activating/deactivating the Traffic Sign Assist
warning function
On-board computer
4
ò
5
Settings
5
Assistance
5
Traffic Sign Assist
#
To activate/deactivate: press the
a
button.
When the warning function is active and you pass a
traffic sign, the instrument cluster shows the traffic
regulations (speed limit and overtaking restriction)
Driving and parking 167
T447 0414 02