Mercedes-Benz EQS Saloon 2021, Руководство пользователя

Страница: 341 / 645

wheel arches when you disconnect the
trailer cable.
*
NOTE Damage to the rear bumper from
installing adapter cables or adapter plugs
The following parts could be damaged when
swiveling the ball neck fully electrically:
R
Bumper
R
Adapter cable
R
Adapter plug
#
Always remove the adapter cable or
adapter plug before swiveling the ball
neck fully electrically.
#
Secure the trailer against rolling away.
#
Disconnect the electrical connection between
the vehicle and the trailer.
#
Uncouple the trailer.
#
Place the cover cap on the ball head.
%
Trailers with LED lighting: after uncoupling the
trailer, switch the vehicle on and then off
again.
Bicycle rack function
&
WARNING Risk of an accident if the bicy-
cle rack is used incorrectly
The bicycle rack may become detached from
the vehicle in the following cases:
R
the permissible load capacity of the trailer
hitch is exceeded.
R
the bicycle rack is used incorrectly.
R
the bicycle rack is secured to the ball neck
beneath the ball head.
Observe the following for your own safety and
that of other road users:
R
always adhere to the permissible load
capacity of the trailer hitch.
R
always observe the permissible rear axle
load of the towing vehicle.
R
use the bicycle rack only to transport bicy-
cles.
R
always mount the bicycle rack properly by
attaching to the ball head and the ball
neck guide pin, if possible.
R
when transporting four bicycles, always
use bicycle racks that have additional sup-
port on the ball neck guide pin.
R
use only bicycle racks approved by
Mercedes-Benz.
R
always observe the bicycle rack operating
instructions.
*
NOTE Damage to or breakage of the trailer
hitch due to unsuitable or improperly used
bicycle rack.
#
Only use bicycle racks approved by
Mercedes-Benz properly as described
below.
*
NOTE Increased risk of damage to prop-
erty due to folded-out ball neck
#
When the trailer is not coupled or the
bicycle rack is attached, fold in the ball
338 Driving and parking