Mercedes-Benz EQS 350, Руководство оператора

Страница: 442 / 581

Removing and fitting the wheel trim/hub caps
Requirements:
R
The vehicle is prepared for a wheel change
(
/
page 438).
Wheel trim
The wheel trim covers the wheel bolts on vehicles
with aluminium wheels. Before unscrewing the
wheel bolts, remove the wheel trim.
#
To remove: using both hands, carefully reach
into two wheel trim openings and remove the
wheel trim.
Raising the vehicle when changing a wheel
Requirements:
R
There are no persons in the vehicle.
R
The vehicle has been prepared for a wheel
change (
/
page 438).
Important notes on using the jack:
R
Use only a vehicle-specific jack that has been
approved by Mercedes-Benz to raise the vehi-
cle.
R
The jack is only designed for raising and hold-
ing the vehicle for a short time while a wheel
is being changed and not for maintenance
work under the vehicle.
R
The jack must be placed on a firm, flat and
non-slip surface. If necessary, use a large, flat,
load-bearing, non-slip underlay.
R
The foot of the jack must be positioned verti-
cally under the jack support point.
Rules of conduct when the vehicle is raised:
R
Never place your hands or feet under the vehi-
cle.
R
Never lie under the vehicle.
Wheels and tyres 439