Mercedes-Benz EQS 350, Руководство оператора

Страница: 316 / 581

#
Pull the ball neck in the direction of the arrow
until it engages audibly in a vertical position.
Indicator lamp 1 on the ball neck release
switch will go out.
If the ball neck is not securely locked in place,
the
Trailer coupling Check lock
message will
appear on the driver's display.
#
Remove the cover cap from the ball head and
store it in a safe place.
Make sure that the ball on the ball neck is clean.
Check that it is either greased or dry (grease-
free), depending on the instructions for the trailer.
Folding the ball neck in
#
Pull switch 2 until the ball neck unlocks.
The ball neck will fold up under the rear
bumper.
Indicator lamp
1 will flash.
#
Push the ball neck in the direction of the
arrow until it engages audibly behind the
bumper.
Indicator lamp 1 will go out and the message
on the driver display will disappear.
Observe the information about the displays on the
driver's display:
R
Indicator and warning lamps (
/
page 527)
R
Display messages (
/
page 458)
Coupling up/uncoupling a trailer
&
WARNING Risk of injury from the vehicle
level being changed
The vehicle level may be changed unintention-
ally, e.g. by other people. You may become
trapped if you couple up or uncouple a trailer
while this is happening. In addition, other peo-
ple could become trapped if their limbs are
between the vehicle body and the tyres or
underneath the vehicle.
Observe the following when coupling up or
uncoupling a trailer:
#
Do not open or close the doors or tail-
gate.
#
Do not lock or unlock the vehicle.
Requirements:
R
The ball neck is extended and engaged in a
securely locked position.
R
Ensure the vehicle is at the normal level
(
/
page 283).
Driving and parking 313