Mercedes-Benz EQA 2022, Руководство пользователя

Страница: 66 / 541

Observe laws and legal requirements
Always observe the legal requirements when
using a child restraint system in the vehicle.
Make sure that the child restraint system is
approved in accordance with the valid test specifi-
cations and guidelines. Further information can
be obtained at a qualified specialist workshop.
Mercedes-Benz recommends that you use a
Mercedes-Benz Service Centre for this purpose.
Only use approved child restraint systems
Only child restraint systems that meet the follow-
ing UNECE standards are permitted for use in the
vehicle:
R
UN-R44
R
UN-R129 (i-Size child restraint systems)
Information on child restraint system approval
categories and details on the approval label on
the child restraint system (
/
page 67).
Detecting risks, avoiding danger
Securing systems for child restraint systems in
the vehicle
Only use the following securing systems for child
restraint systems:
R
the ISOFIX or i-Size securing rings
R
the vehicle's seat belt system
R
the Top Tether anchorages
Fitting an ISOFIX or an i-Size child restraint sys-
tem is preferred.
Simply attaching to the securing rings on the vehi-
cle can reduce the risk of fitting the child restraint
system incorrectly.
When securing a child with the integrated seat
belt of the ISOFIX or i-Size child restraint system,
always comply with the permissible gross weight
for the child and child restraint system
(
/
page 71).
Advantage of a rearward-facing child restraint sys-
tem
It is preferable to transport a baby or a small child
in a suitable rearward-facing child restraint sys-
tem. In this case, the child sits in the opposite
direction to the direction of travel and faces back-
wards.
Babies and small children have comparatively
weak neck muscles in relation to the size and
weight of their head. The risk of injury to the cer-
vical spine during an accident can be reduced in a
rearward-facing child restraint system.
Always secure a child restraint system correctly
&
WARNING Risk of injury or death due to
incorrect installation of the child restraint
system
The child can then not be protected or
restrained as intended.
#
Be sure to comply with the manufactur-
er's installation instructions for the child
restraint system and its correct use.
#
Make sure that the entire base of the
child restraint system always rests on
the sitting surface of the seat.
Occupant safety 63