Mercedes-Benz EQA 2022, Руководство пользователя

Страница: 390 / 541

The tyre pressure loss warning system is only an
aid. It is the driver's responsibility to set the tyre
pressure to the recommended cold tyre pressure
suitable for the operating situation and to check
it.
Be sure to also observe the following further rela-
ted subjects:
R
Notes on tyre pressure (
/
page 383)
R
Display messages about the tyres
(
/
page 478)
Restarting the tyre pressure loss warning system
Requirements:
R
The recommended tyre pressure is correctly
set for the respective operating status on all
wheels.
Restart the tyre pressure loss warning system in
the following situations:
R
The tyre pressure has changed.
R
The wheels or tyres have been changed or
newly fitted.
On-board computer:
4
Service
5
Tyres
#
Swipe downwards on Touch Control on the
left-hand side of the steering wheel.
The Run Flat Indicator active Restart mes-
sage is shown in the display.
#
To begin restart, press Touch Control on the
left-hand side of the steering wheel.
The
Tyre pressure now OK?
message is
shown in the display.
#
Select Yes .
#
To confirm restart, press Touch Control on the
left-hand side of the steering wheel.
The Run Flat Indicator restarted message is
shown in the display.
After you have driven for a few minutes, the
tyre pressure loss warning system monitors
the set tyre pressures of all the tyres.
Be sure to also pay attention to the following rela-
ted topic:
R
Notes on tyre pressure (
/
page 383)
Wheel change
Notes on selecting, fitting and replacing tyres
&
WARNING Risk of accident due to incor-
rect wheel and tyre dimensions
If wheels and tyres of the wrong size are fitted,
the service brakes or components in the brake
system and in the wheel suspension may be
damaged.
#
Always replace wheels and tyres with
those that fulfil the specifications of the
original part.
For wheels, pay attention to the following:
R
Designation
R
Type
For tyres, pay attention to the following:
R
Designation
R
Manufacturer
R
Type
Wheels and tyres 387