Power windows with one-touch func-
tion
One-touch mode is an additional function to the
power window functions already described.
X
To open: briefly press switch
:
.
The window opens fully.
X
Press the switch again to halt the opening
process.
X
To close: briefly pull switch
:
.
The window closes fully.
X
Pull the switch again to halt the closing proc-
ess.
i
This function is only available for the window
in the driver's door.
Hinged windows
X
To open: hold latch
:
at rear and pull it
towards you.
X
Press latch
:
in order to lock the hinged
window in position.
X
To close: swing latch
:
inwards.
X
Push back latch
:
as far as it will go.
The hinged window is locked.
Problems with the side windows
Problem: a side window cannot be closed
and you cannot see the cause.
If you close a side window again immediately
after it has been blocked or reset, the side
window closes with increased or maximum
force. The reversing function is then not
active. Parts of the body could be trapped in
the closing area in the process. This poses an
increased risk of injury or even fatal injury.
Make sure that no parts of the body are in the
closing area. To stop the closing process,
release the switch or push the switch again to
reopen the side window.
If a side window blocks during closing and
reopens again slightly:
X
Immediately after the window blocks, pull the
corresponding switch again until the side win-
dow has closed.
The side window is closed with increased
force.
If a side window blocks again during closing and
reopens again slightly:
X
Immediately after the window blocks, pull the
corresponding switch again until the side win-
dow has closed.
The side window is closed without the anti-
entrapment feature.
Opening the roof hatch
Roof hatch
63
Opening and closing
Z
Содержание Citan 2015
Страница 1: ...Citan Operating Instructions ...
Страница 212: ...210 ...
Страница 213: ...211 ...
Страница 214: ...212 ...