Mercedes-Benz Actros 2017, Руководство по эксплуатации

Страница: 89 / 436

where vehicles drive on the opposite side of
the road to the country where the vehicle is
registered, there is a danger of oncoming traf-
fic being dazzled. Mask the headlamps parti-
ally when driving in these countries
(
Y
page 100).
On vehicles with a manual headlamp range con-
troller: the on-board computer shows the
Headl. range ctrl.
event window when the
dipped-beam headlamps have been switched on
for the first time after the engine has started. If
the illumination of the road is insufficient or the
oncoming traffic may be dazzled, change the
setting shown.
X Change the setting with the
u
or
t
button.
When the vehicle is laden, the road should be
illuminated from 40 m to 100 m and the
dipped-beam headlamps must not dazzle
oncoming vehicles. If the vehicle is unladen,
select level
u
.
Daytime driving lights
X
Turn the key to the start position in the igni-
tion lock.
X Turn the light switch to
$
.
The daytime driving lights are switched on.
or
X Turn the light switch to
c
.
When the dipped-beam headlamps and side
lamps are switched off automatically, the day-
time driving lights come on.
The daytime driving lights switch off automati-
cally when you turn the light switch to
L
.
Automatic headlamp mode
G
WARNING
When the light switch is set to
c
, the
dipped-beam headlamps do not switch on
automatically if there is fog, snow or other
causes of poor visibility such as spray. There
is a risk of an accident.
In such situations, turn the light switch to
L
.
The automatic headlamp feature is only an aid.
The driver is responsible for the vehicle lighting
at all times.
When it is dark or foggy, turn the light switch
from
c
to
L
in good time. The headlamps
may otherwise be switched off temporarily.
X Switch the ignition lock to the drive position.
X
Turn the light switch to
c
.
The dipped-beam headlamps and side lamps
are switched on or off automatically depend-
ing on light conditions. When the dipped-
beam headlamps are switched on, the
L
indicator lamp in the instrument cluster lights
up.
On vehicles with daytime driving lights: when
the dipped-beam headlamps and side lamps
are switched off automatically, the daytime
driving lights come on.
i If the rain/light sensor is malfunctioning,
the side lamps and dipped-beam headlamps
are automatically switched on and remain on.
On vehicles with a manual headlamp range con-
troller: the on-board computer shows the
Headl. range ctrl.
event window when the
dipped-beam headlamps have been switched on
for the first time after the engine has started. If
the illumination of the road is insufficient or the
oncoming traffic may be dazzled, change the
setting shown.
X Change the setting with the
u
or
t
button.
For laden vehicles, the road should be illumi-
nated from 40 m to 100 m and the dipped-
beam headlamps must not dazzle oncoming
vehicles. If the vehicle is unladen, select level
u
.
i You can also adjust the headlamp range
using the Lighting menu window in the
ä
menu settings (
Y
page 149).
Foglamps and rear foglamp
X Turn the light switch to the
T
or
L
position.
X
To switch on the foglamps: pull the light
switch out to position
5
.
The foglamps and the
N
foglamp indicator
lamp next to the light switch light up.
X
To switch on the front and rear foglamps:
pull the light switch out to position
6
.
The front foglamps, rear foglamp and the
N
foglamp and
Q
rear foglamp indica-
tor lamps next to the light switch light up.
i If the vehicle only has a rear foglamp, turn
the light switch to
L
and pull the light
switch out to level
6
.
Lighting system
87
Driver's workstation
Z