Mercedes-Benz Actros 2017, Руководство по эксплуатации

Страница: 83 / 436

Upper berth
Folding the seat backrest up to the fully
reclined position
Example: left retainer belt
Example: safety net anchorage
X
Unhook retainer belts
:
on the right and left
of backrest
;
.
X
Swing up backrest
;
.
X
On the rear of seat backrest
;
, release
safety net
=
from retaining pins
?
and from
the press studs on the right and left.
X
Swing backrest
;
to the horizontal position
and hold it there.
X Clip belt tongues
B
into seat belt buckles
A
on the right and left.
Folding the seat backrest down to the
upright position
X Lift up backrest
;
slightly, hold it in place and
press release buttons
C
of buckles
A
on the
left and right.
X
Swing backrest
;
slightly upwards.
X On the back of seat backrest
;
, fasten safety
net
=
to retaining pins
?
and to the right
and left press studs.
X
Swing the berth down to the rear panel.
X Hook retainer belts
:
onto the right and left
of backrest
;
.
SoloStar Concept
Co-driver's seat and folding table
G
WARNING
If the folding table is folded out while the vehi-
cle is in motion, vehicle occupants may bang
into it, particularly in an accident, under sud-
den braking or during abrupt changes of direc-
tion. There is a risk of injury.
Fold up the folding table before every journey.
G
WARNING
If objects, luggage or loads are not secured or
not secured sufficiently, they could slip, tip
over or be flung around and thereby hit vehicle
occupants. There is a risk of injury, especially
when braking or abruptly changing directions.
Always store objects so that they cannot be
flung around. Secure objects, luggage or
loads against slipping or tipping before the
journey.
While the vehicle is in motion, store loose
objects in the stowage spaces and stowage
compartments (
Y
page 107).
Beds in an L cab
81
Driver's workstation
Z