Mercedes-Benz ACTROS 2002 Скачать руководство пользователя

Страница: 458 / 620

453

Practical advice

Cab

Before tilting the cab:

Apply the parking brake.

Additionally secure the vehicle with
wheel chocks.

Select neutral

at the transmission.

Switch off engine and turn key in the ig-
nition lock back to position

Switch off auxiliary air conditioning or
auxiliary heating.

Close all doors, stowage compart-
ments inside cab, and outside flaps
making sure that they audibly engage.

Remove all loose objects (e.g. cans,
bottles, tools, bags, etc.) from cab and
stowage pockets in the doors.

Vehicles with refrigerator: Switch off
and empty refrigerator.

For safety reasons, keep area in front
of gear lever and in front of cab unob-
structed.

The front coupling pin must be properly
inserted.

MEGASPACE, car transporter,
LowLiner and vehicles with electro-
hydraulic cab tilting system: Open
maintenance flap (

page 417) and

swing it fully upwards.

Tilting the cab

Risk of injury

As the cab is tilted it can suddenly fall for-

wards to end position. Persons remaining

within cab tilting area can be injured.

Only tilt the cab when the tilting area is

clear.

Содержание ACTROS 2002













































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ACTROS 2002

Отзывы:

Похожие инструкции для ACTROS 2002

Бренды по названию

Популярные бренды

Mercedes-Benz ACTROS 2002, Руководство по эксплуатации

Результаты поиска

Содержание ACTROS 2002

Отзывы:

Похожие инструкции для ACTROS 2002

Бренды по названию

Популярные бренды