Mercedes-Benz 320 SE, Руководство оператора

Страница: 73 / 157

73
Garage Door Opener
1 Remote control transmitter located on
inside rear view mirror
2 Portable remote control transmitter
The built-in remote control is capable
of operating up to three separately
controlled objects.
Warning!
When programming a garage door
opener, the door moves up or down.
When programming or operating the
remote control make sure there is no
possibility of anyone being harmed
by the moving door.
Note:
Certain types of garage door openers
are incompatible with the integrated
opener. If you should experience
difficulties with programming the
transmitter, contact your authorized
Mercedes-Benz dealer or call
Mercedes-Benz Customer Assistance
Center (in the U.S.A. only) at 1-800-
FOR-MERCEDES.
Programming or reprogramming the
remote control:
1. Turn key in steering lock to
position 1 or 2.
2. Press and hold one button of
the remote control located on
the inside rear view mirror until
its control light begins to flash at
a rate of about once a second.
Continue holding down the
button.
Note:
The light blinks immediately if the
remote control is being programmed
for the first time, or if its memory
was previously erased. If you are
reprogramming a previously used
button, the light will flash after
about 20 seconds.
3. Hold end opposite to battery of
portable remote control against
the inside rear view mirror trans-
mitter to be programmed. While
still holding down the button on
the transmitter on the inside rear
view mirror, press down the but
ton on your portableremote control,
until the inside rear view