Mercedes-Benz 2013 CLS Coupe, Руководство пользователя

Страница: 142 / 424

Information about using
THERMOTRONIC automatic climate
control
Automatic climate control
The following contains instructions and rec-
ommendations to enable you to get the most
out of your THERMOTRONIC automatic cli-
mate control.
R
Activate climate control using the
Ã
and
¿
buttons. The indicator lamps above
the
Ã
and
¿
buttons light up.
R
In automatic mode, you can also use the
ñ
button to set a climate mode
(FOCUS/MEDIUM/DIFFUSE). The
MEDIUM level is recommended.
R
Set the temperature to 22 †.
R
Only use the "windscreen demisting" func-
tion briefly until the windscreen is clear
again.
R
Only use air-recirculation mode briefly, e.g.
if there are unpleasant outside odours or
when in a tunnel. The windows could oth-
erwise mist up as no fresh air is drawn into
the vehicle in air-recirculation mode.
R
Use the ZONE function to adopt the tem-
perature settings on the driver's side for
the front-passenger side and the rear com-
partment as well. The indicator lamp above
the
á
button goes out.
R
Use the residual heat function if you want
to heat or ventilate the vehicle interior
when the ignition is switched off. The resid-
ual heat function can only be activated or
deactivated with the ignition switched off.
R
Vehicles with COMAND Online Multime-
dia-System: if you change the settings of
the climate control system, the climate sta-
tus display appears for approximately three
seconds at the bottom of the screen in the
COMAND display. See also the separate
COMAND Online operating instructions.
You will see the current settings of the var-
ious climate control functions.
ECO start/stop function
During automatic engine switch-off, the cli-
mate control only operates at a reduced capa-
city. If you require the full climate control out-
put, you can switch off the ECO start/stop
function by pressing the ECO button
(
Y
page 162).
Operating the climate control system
Switching climate control on/off
Points to observe before use
When the climate control is switched off, the
air supply and air circulation are also
switched off. The windows could mist up.
Therefore, switch off the climate control only
briefly.
i Activate climate control primarily using
the
Ã
button (
Y
page 142).
Switching on/off
X Turn the key to position 2 in the ignition
lock (
Y
page 157).
X
To switch on: press the
Ã
button on
the control panel for the climate control.
The indicator lamp in the
Ã
button lights
up. Airflow and air distribution are set to
automatic mode.
or
X
Press the
^
button.
The indicator lamp in the
^
button goes
out. The previous settings are reactivated.
X
To switch off: press the
^
button.
The indicator lamp in the
^
button lights
up.
140
Operating the climate control system
Climate control