Mercedes-Benz 2013 CLA, Руководство пользователя

Страница: 59 / 352

Suitable positioning of the child restraint systems
Only child restraint systems which are approved in accordance with the ECE standard ECE
R44 are permitted for use in the vehicle.
Suitability of the seats for attaching belted child restraint systems
Key to the letters used in the table:
X
Seat which is unsuitable for children in this weight category.
U Suitable for child restraint systems in the "Universal" category that are approved for use
in this weight category.
UF Suitable for forward-facing child restraint systems that belong to the "Universal" category
and are approved for use in this weight category.
L Suitable for child restraint systems as recommended, see the following table of "Recom-
mended child restraint systems" (
Y
page 59).
Seat positions
Weight catego-
ries
Front-passenger seat
Rear seat
1
Front-
passenger
front airbag is
not disabled
Front-
passenger
front airbag is
disabled
Left, right Centre
Category 0: up
to 10 kg
X
U
2, 3
, L
2, 3
U, L U, L
Category 0+:
up to 13 kg
X
U
2, 3
, L
2, 3 U, L U, L
Category I: 9 to
18 kg
UF
3
, L
3
U
3
, L
3 U, L U, L
1 If you use a baby car seat of category 0 or 0+ or a rearward-facing child restraint system of category I on a
rear seat, you must adjust the driver's or front-passenger seat so that the seat does not touch the rearward-
facing child restraint.
2 Vehicles with automatic child seat recognition in the front-passenger seat: a child restraint system of the
"Universal" category with a transponder for automatic child seat recognition must be fitted. The PASSENGER
AIRBAG OFF indicator lamp must be lit.
3 Move the front-passenger seat as far back as possible. If you secure a child in a forward-facing child restraint
system on the front-passenger seat, ensure that the shoulder belt strap from the belt outlet on the vehicle
is routed towards the front to the shoulder belt guide on the child restraint system. Set the belt height
adjustment so that the belt strap is routed towards the front along the bottom. Move the front-passenger
seat to the highest position and move the backrest to an almost vertical position. When doing so, ensure
that the complete surface of the child restraint system rests against the backrest of the front-passenger seat
and that the child restraint system does not touch the roof. To do so, you may have to adjust the backrest
down a little. For seats with electrical adjustment, the seat cushion angle must be set to the highest and
most upright position.
Children in the vehicle
57
Safety
Z